Programming the Payload Release System for Matrice 600 with the Channel Expansion kit

Programming the Payload Release System for Matrice 600 with the Channel Expansion kit

Once the hardware is installed on the Matrice 600 and wired to a port you will need to program the Channel Expansion and Matrice 600 Pro.

Follow the Instructions to install the Channel Expansion module on the remote controller. 
This video will help you install the Channel Expansion Module.  https://www.youtube.com/watch?v=39pLDzkilhE


Once you have the Remote Control setup you need to set the Servo Levels and switch you want to use.  To do this you need to open DJI Assistant 2 for Matrice Series. 
  1. Open DJI Assistant 2 for Matrice Series
  2. Connect the Matrice 600 to the computer
  3. Log in using your DJI account
  4. Power up the Matrice 600 and Remote Control
  5. The Drone will connect.  Click on 'Flight Controller'
  6. Click on the 'Tools' Button
  7. Choose the slot that you connected the Wiring Harness from the drop kit to.  In this case we used S1.
  8. Set the Spraying Frequency top and bottom levels to adjust the servo pin to the open and closed levels when you toggle your switch (depending on which switch or dial you use).
  9. Once you have done this you can exit DJI Assistant for Matrice Series and power down the drone.

    • Related Articles

    • Blue Skies Drones - Payload Release System for DJI M600 Pro

      Blue Skies Drones' Professional Heavy Duty M600pro Payload Release Mechanism Kit were purpose-designed and built to be durable for the enterprise UAV user and able to lift heavy payloads for industrial use.  Patent Pending. PLEASE TAKE NOTE OF THE ...

    • Operating the Matrice 210 Payload Release System

      Specs are located here: https://www.blueskiesdroneshop.com/products/payload-release-drop-kit-for-dji-m210-series Operating the M210 Payload Release Drop Kit is done through our Control Box ST1 and the auxiliary power port on the back of the M210.  ​ ...

    • What Payloads are compatible with the Matrice 300 RTK?

      The Matrice 300 compatible payloads are: Zenmuse H20N, Zenmuse L1, Zenmuse p1, Zenmuse H20/H20T, Zenmuse XT S, Zenmuse XT2, Zenmuse Z30 and third-party payloads developed based on the DJI Payload SDK. The Matrice 300 does NOT support the Zenmuse XT, ...

    • Payload Release System for Matrice 600

    • What cameras & sensors work with the Matrice 200 Series?

      The Matrice Series have a built in FPV camera.  Additionally you can add a single camera or sensor to the Matrice 200. The Matrice 210 and the Matrice 210 RTK can each mount one or two cameras or sensors. There are a number of 3rd party sensors that ...