What DJI cameras work with the Matrice 600 and Matrice 600 Pro?

What DJI cameras work with the Matrice 600 and Matrice 600 Pro?

There are a number of 3rd party sensors that also work with the Matrice 600 Series

DJI Produced Sensors for Matrice 600 Series

  1. DJI ZENMUSE Z3 - Uses the X3 Gimbal Mounting Plate.  7 times zoom.

  2. DJI ZENMUSE X5 - Uses the X3 Gimbal Mounting Plate. Rolling Shutter.  20MP.  Suited for Video and Photography.  Interchangeable lens but comes with a 15mm lens from the manufacturer.

  3. DJI ZENMUSE XT - Uses the X3 Gimbal Mounting Plate. This is Thermal imagery.  Suited for Inspection and specialized mapping.  Multiple lens size options for the thermal configuration.

  4. DJI ZENMUSE XT2 - Uses the Z30 Gimbal Mounting Plate  This is Thermal and RGB imagery.  Suited for Inspection and specialized mapping.  Multiple lens size options for the thermal configuration.

  5. DJI ZENMUSE Z30 - Uses the Z30 Gimbal Mounting Plate.  30x optical zoom.  Suited for Inspection use.



    • Related Articles

    • What cameras & sensors work with the Matrice 200 Series?

      The Matrice Series have a built in FPV camera.  Additionally you can add a single camera or sensor to the Matrice 200. The Matrice 210 and the Matrice 210 RTK can each mount one or two cameras or sensors. There are a number of 3rd party sensors that ...
    • Blue Skies Drones - Payload Release System for DJI M600 Pro

      Blue Skies Drones' Professional Heavy Duty M600pro Payload Release Mechanism Kit were purpose-designed and built to be durable for the enterprise UAV user and able to lift heavy payloads for industrial use.  Patent Pending. PLEASE TAKE NOTE OF THE ...
    • Laser Methane Falcon System for Matrice 300

      Laser Falcon with Skyhub For the M300, it is much cleaner application.  It shows live ppm on the remote control while flying and records the ppm data to the skyhub with GPS from the drone.  There is a laser altimeter for true terrain following that ...
    • Matrice 600 FPV Installation

      The camera mount and camera screw to the mount.  The mount then snaps in place on the rail system from the Matrice 600 (pro). The included wire connects to the camera and is fed through the underbody of Matrice 600 and then connects to teh A3 Light ...
    • Programming the Payload Release System for Matrice 600 with the Channel Expansion kit

      Once the hardware is installed on the Matrice 600 and wired to a port you will need to program the Channel Expansion and Matrice 600 Pro. Follow the Instructions to install the Channel Expansion module on the remote controller.  This video will help ...