Unitree Go2 Remote Control Commands

Unitree Go2 Remote Control Commands

If you are just using the remote controller, here is a quick guide on the DOG functions that can be performed.

These are subject to change with firmware updates.

    • Related Articles

    • Unitree Dog Rental

      We are excited to let you know that your rental equipment has been shipped today. The shipment will arrive in a secure hard travel case sealed with zip-ties for added protection. Please review the following important details to ensure a smooth ...
    • Remote ID for Drones

      A list of currently Remote ID capable drones can be found here: https://uasdoc.faa.gov/listDocs Most drones made release after September 2022 have the Remote ID Capabilities built in. Most made before that do not have Remote ID natively and will ...
    • DJI Remote Compatibility (1-20-25)

    • Parrot Anafi GOV - Remote is Disconnected

      It is not uncommon for the drone and remote to disconnect after a firmware update. The first step is to reboot both drone and controller. If it remains unbound, with both powered on please connect the remote's USB-C port to the drone's USB-C port (on ...
    • QySea E-GO Series Thruster Replacement (propeller replacement)

      To replace the thruster on the E-GO series. Use the following Steps. 1. Remove the Shroud screws 2. Remove the 4 Motor Connector Screws 3. Detach the motor power connector 4. Remove Motor Mount Screw 5. Remove and Replace Thruster with propeller The ...