Sony ILX-LR1 Recovery Manual

Sony ILX-LR1 Recovery Manual

There might be the case that the Sony ILX-LR1 stops working and a cam warning is displayed in QBase.

The cause is that the internal Sony ILX-LR1 battery, responsible for keeping the date/time of the camera, discharges over time. The internal battery is fully charged during production, but it is possible for the battery to discharge, which can lead to issues with detecting the camera during startup.

Quantum Systems is actively working on a way to prevent this issue on software side.

For now, it is possible to prevent this from happening by connecting and powering the camera at least one hour per month by connecting it to the Trinity Pro and connecting a battery to the Trinity Pro as well. After one hour the battery is fully charged, which should be sufficient to keep date/time for one month.


See Attached for Full Recovery Instructions

    • Related Articles

    • MSDS for Dolphin 1

      MSDS for Dolphin 1.
    • QySea Warranty Information

      PART I – LIMITED WARRANTY These QYSEA After-Sales Policies (these “Policies”) only apply to QYSEA products you purchased from QYSEA authorized retailers or QYSEA directly for your own use and not for resale. These Policies are available in other ...
    • Laser Methane Falcon System for Matrice 300

      Laser Falcon with Skyhub For the M300, it is much cleaner application. It shows live ppm on the remote control while flying and records the ppm data to the skyhub with GPS from the drone. There is a laser altimeter for true terrain following that is ...
    • Autel Robotics - Live Deck - Ethernet port setup

      Ethernet port setup Windows 10 and MacOS - Download PDF Windows 10 Download and install VLC Player: https://www.videolan.org/vlc/index.html Power on and pair your Live Deck with an EVO or EVO 2 aircraft On PC (Windows 10) Connect the Live Deck to ...
    • How to Manually record with the Micasense Rededge-M Series

      These are the instructions on how to use the Rededge-M by Micasense on a drone that does not have a full integration for triggering. Make sure your camera is connected and powered on (if using drone power, the drone will need to be on). Connect to ...