QySea Thrust Protector Installation

QySea Thrust Protector Installation

On the Box is a diagram with numbers which tells you which shows the location of each protector.

Then on the bottom of each thruster are the numbers for each thruster protector.

    • Related Articles

    • QySea FiFish V6 HDMI Box Setup

    • QySea V6 Propeller Installation

      here are 2 types of propellers for the V6.  Please follow these instructions for the proper location
    • QySea Fifish HDMI Box Setup

      The HDMI box can be powered by the Remote Controller AC charger and the short cord included with the HDMI box or it can be powered by a phone charger that meets the 5V 3Amps requirements of the HDMI box.
    • QySea Fifish V6 Motor Repair

      Cut off the wire to the motor ESC close to the old ESC Script the cable back and strip the individual cables to fit into the new ESC.  Strip only 2-3 MM. Solder the wires to the corresponding spots below. Bench test motors. Fill with Marine Flexible ...
    • Matrice 600 FPV Installation

      The camera mount and camera screw to the mount.  The mount then snaps in place on the rail system from the Matrice 600 (pro). The included wire connects to the camera and is fed through the underbody of Matrice 600 and then connects to teh A3 Light ...