QySea Fifish HDMI Box Setup

The HDMI box can be powered by the Remote Controller AC charger and the short cord included with the HDMI box or it can be powered by a phone charger that meets the 5V 3Amps requirements of the HDMI box.

• Related Articles

• QySea FiFish V6 HDMI Box Setup

• QySea Thrust Protector Installation

  On the Box is a diagram with numbers which tells you which shows the location of each protector. Then on the bottom of each thruster are the numbers for each thruster protector.

• QySea V6 Propeller Installation

  here are 2 types of propellers for the V6.  Please follow these instructions for the proper location

• Autel Robotics - Live Deck - Ethernet port setup

  Ethernet port setup Windows 10 and MacOS - Download PDF Windows 10 Download and install VLC Player: https://www.videolan.org/vlc/index.html Power on and pair your Live Deck with an EVO or EVO 2 aircraft On PC (Windows 10) Connect the Live Deck to ...

• QySea Fifish V6 Motor Repair

  Cut off the wire to the motor ESC close to the old ESC Script the cable back and strip the individual cables to fit into the new ESC.  Strip only 2-3 MM. Solder the wires to the corresponding spots below. Bench test motors. Fill with Marine Flexible ...