Micasense Altum-PT Sample Data

Micasense Altum-PT Sample Data

Check out this link here for Altum-PT flight over a Blueberry farm:

 

https://static.micasense.com/samples/altum-pt-blueberries-60m-sample-data.zip

    • Related Articles

    • How to Manually record with the Micasense Rededge-M Series

      These are the instructions on how to use the Rededge-M by Micasense on a drone that does not have a full integration for triggering. Make sure your camera is connected and powered on (if using drone power, the drone will need to be on). Connect to ...

    • Laser Methane Sensor for Matrice 600

      Thank you for renting from Blue Skies Drone Rental! Please review this guide for getting your LMC up in the air quickly. 1.       We verify each unit is ready for flight before we ship out the units, but we want you to verify no damage has occurred ...

    • LMC M210 V1 Install Guide

      M210 V1 + LMC Laser Methane Install Guide Thank you for renting from Blue Skies Drone Rental! Please review this guide for getting your LMC up in the air quickly. We verify each unit is ready for flight before we ship out the units, but we want you ...

    • Laser Methane Falcon System for Matrice 300

      Laser Falcon with Skyhub For the M300, it is much cleaner application. It shows live ppm on the remote control while flying and records the ppm data to the skyhub with GPS from the drone. There is a laser altimeter for true terrain following that is ...

    • DJI - Zenmuse L1 & L2 Lidar Processing

      The first important step is collecting valid data. NOTE: To prepare the lidar data and create a LAS file, you need a GNSS base station. It is recommended, for easiest processing, to use the DJI D-RTK 2 Base Station. You can, however, use a CORS ...