Mapping with the Matrice 30T

Mapping with the Matrice 30T

While the Matrice 30T is not a dedicated mapping drone.  It does have the capabilities to capture mapping data.

When mapping it is easy to select the wide or the thermal camera from the menu.  However, there is not an option to select the zoom camera.

If you want to use the zoom camera for mapping then you can create a custom camera. 

Use the following settings for a custom camera:
  1. sensor size of 6.4 mm x 4.8 mm
  2. a focal length of 21-75 mm
  3. photo resolution of: 4000x3000/8000x6000

    • Related Articles

    • What cameras & sensors work with the Matrice 200 Series?

      The Matrice Series have a built in FPV camera.  Additionally you can add a single camera or sensor to the Matrice 200. The Matrice 210 and the Matrice 210 RTK can each mount one or two cameras or sensors. There are a number of 3rd party sensors that ...
    • What Payloads are compatible with the Matrice 300 RTK?

      The Matrice 300 compatible payloads are: Zenmuse H20N, Zenmuse L1, Zenmuse p1, Zenmuse H20/H20T, Zenmuse XT S, Zenmuse XT2, Zenmuse Z30 and third-party payloads developed based on the DJI Payload SDK. The Matrice 300 does NOT support the Zenmuse XT, ...
    • What DJI cameras work with the Matrice 600 and Matrice 600 Pro?

      There are a number of 3rd party sensors that also work with the Matrice 600 Series DJI Produced Sensors for Matrice 600 Series DJI ZENMUSE Z3 - Uses the X3 Gimbal Mounting Plate.  7 times zoom. DJI ZENMUSE X5 - Uses the X3 Gimbal Mounting Plate. ...
    • Laser Methane Falcon System for Matrice 300

      Laser Falcon with Skyhub For the M300, it is much cleaner application.  It shows live ppm on the remote control while flying and records the ppm data to the skyhub with GPS from the drone.  There is a laser altimeter for true terrain following that ...
    • Matrice 600 FPV Installation

      The camera mount and camera screw to the mount.  The mount then snaps in place on the rail system from the Matrice 600 (pro). The included wire connects to the camera and is fed through the underbody of Matrice 600 and then connects to the A3 Light ...