How do I find my Firmware Version and Serial Number for my Matrice 30 Series Drone?

How do I find my Firmware Version and Serial Number for my Matrice 30 Series Drone?


    • Related Articles

    • What cameras & sensors work with the Matrice 200 Series?

      The Matrice Series have a built in FPV camera.  Additionally you can add a single camera or sensor to the Matrice 200. The Matrice 210 and the Matrice 210 RTK can each mount one or two cameras or sensors. There are a number of 3rd party sensors that ...
    • Laser Methane Falcon System for Matrice 300

      Laser Falcon with Skyhub For the M300, it is much cleaner application.  It shows live ppm on the remote control while flying and records the ppm data to the skyhub with GPS from the drone.  There is a laser altimeter for true terrain following that ...
    • How to Manually record with the Micasense Rededge-M Series

      These are the instructions on how to use the Rededge-M by Micasense on a drone that does not have a full integration for triggering. Make sure your camera is connected and powered on (if using drone power, the drone will need to be on). Connect to ...
    • Can I use a thermal drone to find a missing animal?

      What is a thermal drone? A Thermal drone is a drone that has a Infrared radiation (IR) Sensor, often referred to as a camera. These IR sensors measure parts of the visual spectrum that represent heat energy.  IR light cannot be seen by the human eye ...
    • What Payloads are compatible with the Matrice 300 RTK?

      The Matrice 300 compatible payloads are: Zenmuse H20N, Zenmuse L1, Zenmuse p1, Zenmuse H20/H20T, Zenmuse XT S, Zenmuse XT2, Zenmuse Z30 and third-party payloads developed based on the DJI Payload SDK. The Matrice 300 does NOT support the Zenmuse XT, ...