Popular Articles
Programming the Payload Release System for Matrice 600 with the Channel Expansion kit
Once the hardware is installed on the Matrice 600 and wired to a port you will need to program the Channel Expansion and Matrice 600 Pro. Follow the Instructions to install the Channel Expansion module on the remote controller. This video will help ...
QySea Fifish V6 Motor Repair
Cut off the wire to the motor ESC close to the old ESC Strip the cable back and strip the individual cables to fit into the new ESC. Strip only 2-3 MM. Solder the wires to the corresponding spots below. Bench test motors. Fill with Marine Flexible ...
Remote ID - Autel Robotics
To comply with FAA regulations, Remote ID capability will soon be released for all our major drone series. This feature will monitor the drone’s location and broadcast identification information while in flight. This will make it easier to fly our ...
What Dongle can I use with the P4 RTK?
It is recommended to use the ZTE MF833V USB Dongle Adapter Mbps Wireless Modem Mobile Broad Band 4G LTE Stick if you want a dedicated LTE access for your Phantom 4 RTK. You can find it here on Amazon: https://amzn.to/2qAjUbZ 4G LTE Unlocked GSM ...
ROV - AFTER USE CARE INSTRUCTIONS
After using your ROV it is imperative to clean it immediately after use. This is especially true if the ROV has been in saltwater or in a chlorinated pool as the salt and chlorine can cause exposed metal to stain and rust. Tip: Avoid leaving the ...